Includes:
  • Full tank of titanium fuel ~50g (3 minutes)
  • Wireless remote 
Sparkular User Manual
File Size: 6755 kb
File Type: pdf
Download File
$175.00/each - 2 Day Rental with Flexible Return Date
​+$50/200g Packet of fuel (~15 minutes)
+$30/DMX Controller w/h Cables
+Technician Operator Available
$30.00 - Get up to 20% back with Spark Rewards*
Recommendation:
Who would we be without a Sparkular in our lineup?! This machine uses titanium powder to create a continuous spark effect that is shot vertically into the air up to 5 meters. It is safe to use, cool to the touch, and can be used both indoors and out. Our favourite use for these is to select a pair to use for your grand entrance, first dance, and high energy dancing into the night! We recommend these units be used by our techs to prevent any misuse that can cause damage to the equipment.
Fast Facts:
  • Sparkular effect height: 1-5 meters 
  • For simple control (effect on, effect pulse), use wireless remote
  • For advanced control (height adjustment, duration, control specific unit) Add DMX Controller
  • Both indoor and outdoor use
  • Connect up to 6 units 

Simple Operation - DMX:
Connect DMX controller to all Sparkulars
Turn on DMX controller and press Edit/Run button so LED turns ON
Press channel one twice so LED turns ON
After 10 minutes of waiting for Sparkulars to heat up, you can activate using following:
- Channel 2 adjusts density
- Channel 3 adjust height
- Channel 1 - push all the way up to full to activate effect
*** After operation, move channel one to 190. This will initiate a cool down mode. After 5 seconds from setting to 190,  residual sparks will be cleared from the machine and the back LED panel will begin counting down (internal temperature). Once this reaches ~200, you can turn the unit off using the on/off switch.

Simple Operation - Wireless Remote:
​Press 1:: Emits effect for 8 seconds (press to stop early)
Press 2-8: (Not in use for simple operation)
Press 9: Emits effect for 1.5 seconds, no effect for 1 second (3 cycles)
Press 10: Emits effect for 30 seconds
Press 11: STOP ANY EFFECT
Press 12: Press to cool down and turn off machine. Required before off switch on machine or unplugging

Quick Operating Instructions:
*Ensure that the fuel lid is closed immediately after filling, never leave open for long period of time
*Continuous spark effect will not last longer than 30 seconds
  1. Insert fuel inside the tank by opening up the rubber lid, and securely closing after filling. Fuel can be added while the machine is on, but be sure to close the cap after use.
  2. After turning on the machine, it will take about 5 minutes to heat up to operational temperature
  3. The indicator light 'READY" will stop flickering to indicate that the temperature is set and machine ready to be used.
  4. Wireless remote functions can now be used
  5. After use be sure to begin the soft shutdown process by pressing 12 on remote control and let the fixture cool down for 10-15 minutes before turning off. (The DMX cable should be removed to ensure the wireless remote signal can be received if connected). Once this process begins, you'll see three digits indicating the temperature of the device, and it slowly dropping to cool down.