PGM 8 User Manual
File Size: 3707 kb
File Type: pdf
Download File

Yorkville PGM 8 -  Mixer
$20.00 - 2 Day Rental with Flexible Return Date
$4.00 - Get up to 20% back with Spark Rewards*
Recommendation:
This Yorkville mixer is what you need when you're wanting to connect several inputs, such as multiple microphones (wired or wireless), to a speaker system.  This mixer allows you to connect up to 6 microphones, or 5 microphones and a stereo input (for example music or audio from a movie). If you only have 2 or 3 sources, consider our Economy Mixer.

Fast Facts:
  • 6 Mono (microphone) & 2 Stereo (music) inputs
  • Phantom power for condenser microphones
  • Main mix, stereo CD/tape plus separate headphone outputs

Specifications:
  • Four Mono Input Channels with XLR & -inch TRS inputs
  • Channel 4 Mono Input has a Hi-Z input switch
  • Two Additional stereo line input channels (5/6 and 7/8)
  • Additional XLR mono input per stereo channel for maximum 6 Mic inputs
  • Input gain level control with Non-defeatable soft multi-slope compressor on every input
  • 3-band EQ, High Pass Filter, Monitor send , Effect Send, Clip LED, Mute Switch and Pan control per Channel
  • 60mm Faders Throughout
  • Global 48 volt Phantom Power
  • 7-band stereo graphic EQ on Main Outs
  • Stereo RCA Record Outputs with Level Control
  • BREAK Switch (mutes all input channels)
  • Stereo RCA Media Input Jacks with Rotary Level Control (returns pre equalizer, post BREAK switch).
  • Monitor TRS Output
  • Main stereo TRS phone and XLR outputs
  • Sixteen 24bit digital audio effects
  • Effects TRS output jack
  • Effects defeat footswitch jack
  • Effects return to Main and Monitor
  • Stereo Return TRS jacks with fader
  • Headphone Level Control
  • Stereo Headphone Output Jack (Signal strong enough to drive 8-ohm speakers)
  • Dual 10-segment LED Output Meter
  • EC removable line cord receptacle (No Adaptors)
  • Universal Power Supply from 90VAC to 264VAC at either 50Hz or 60Hz.

​Specifications:
  • Number of Channels - 8
  • Mono Channel EQ - 3-band
  • Pan/Balance Controls - 4/2
  • Channel Overload Protection - Yes
  • Inputs - XLR (bal)6, 1/4" 6. RCA 1 stereo pair
  • Phantom Power - 48 volt + LED indicator
  • VU Meters - 2 x 10 Segment LEDs
  • Headphone Monitor Features - yes
  • Internal Effects - 24 bit stereo 16 effects
  • Effects Sends - 2 (1 internal, 1 external)
  • Effects Returns - Main and Monitor
  • Reverb / Effects Footswitch - yes
  • Record Outputs - 1 stereo pair
  • Signal to Noise Ratio (dB) - Greater Than -100dB
  • Frequency Response (all EQ Flat,+/-2dB)- 20Hz-20KHz
  • THD (Main out w/ -10dB input)- Less Than 0.05%
  • Typical crosstalk -1 kHz (dB) - Greater Than -60dB
  • CMRR @ 60Hz (min/typ) - 55dB/65dB
  • Power Consumption (typ/max) - 26VA (typical)
  • Chassis Construction - Steel
  • Dimensions (DWH, inches)- 14.2 x 12.8 x 2.8 (DWH, cm) - 36 x 32.5 x 7 
  • Weight (lbs/kg) - 8.5/3.8